-
Details
With your adventurous attitude and determined spirit, you tend to get yourself stuck in between a rock and a hard place. . . literally. With the help of your nifty Offroad Jack and the support of the MORryde Offroad Jack Carrier, you will be able to play more and worry less. Our heavy-duty Jeep accessories are durable and stand the test of time. Our Offroad Jack Carrier easily mounts to the Heavy-Duty TJ Tailgate Hinge Upgrade (sold seperately) with just a few pieces of hardware.
The beautiful thing about the MORryde Jeep product line is that they were designed specifically to be used with our other Jeep products. The Offroad Jack Carrier has provision for mounting the CB Antenna Mount so you can stay connected on your adventures. For the ultimate tailgate upgrade (and reinforcement), pair your Offroad Jack Carrier with the MORryde Heavy-Duty Tailgate Hinge.
Jeep Wrangler Tailgate Accessory Tip:
MORryde’s tailgate accessory system is modular, meaning you can purchase and install whichever parts your situation demands. For example, when you’re still toting the factory spare, start off with installing just the hinges for a rattle-free tailgate. When you upgrade to a heavier spare that will fit on the stock carrier, then install the reinforcement along with the hinges. If you go to a larger, heavier spare, install both the reinforcement and the spare tire carrier for optimal reinforcement, both sold separately.
*The Offroad Jack Carrier must be mounted to the MORryde Heavy Duty Tailgate Hinges
FREE SHIPPING!
-
Details
Set yourself apart and go the distance with the MORryde Rotopax Hinge Mount. While others turn the wheel and call it a day, you are able to stay, play, and explore further! Our heavy-duty Jeep accessories are durable and stand the test of time. Our Rotopax Hinge Mount (JP54-023) easily attaches to the Heavy-Duty TJ Tailgate Hinge Upgrade (sold seperately) with just a few pieces of hardware. No drilling or additional holes necessary!
The beautiful thing about our Jeep product line is that they were designed specifically to be used with our other Jeep accessories. The Rotopax Hinge Mount has provision for mounting the CB Antenna Mount so you can stay connected on your long adventures. Be sure to pair your Rotopax Hinge Mount with the MORryde Heavy-Duty Tailgate Hinge.
Jeep Wrangler Tailgate Accessory Tip:
MORryde’s tailgate accessory system is modular, meaning you can purchase and install whichever parts your situation demands. For example, when you’re still toting the factory spare, start off with installing just the hinges for a rattle-free tailgate. When you upgrade to a heavier spare that will fit on the stock carrier, then install the reinforcement along with the hinges. If you go to a larger, heavier spare, install both the reinforcement and the spare tire carrier for optimal reinforcement, both sold separately.
*The Rotopax Hinge Mount must be attached to the MORryde Heavy Duty Tailgate Hinges (sold separately)
-
Details
Big tires mean big adventures for Jeep enthusiasts, but it also means a big burden on your tailgate when you haul the spare. Introducing MORryde’s Jeep Wrangler TJ Tailgate Complete Reinforcement Kit (JP54-022), an American-made Jeep Wrangler TJ accessory that provides added reinforcement to reduce weak points in the factory tailgate-hinge system while retaining Jeep’s iconic look.
Unlike most swing-away spare carriers, this laser-cut and welded tailgate reinforcement kit doesn’t add hundreds of pounds to your vehicle, and unlike competing cast-aluminum carriers, MORryde’s system reinforces the entire spare carrier, not just the right side, to prevent your tailgate from cracking. This accessory is compatible with factory and aftermarket bumpers, along with factory spare tire carriers.
MORryde Part # JP54-022
In The Box:
- 2 HD TJ Tailgate Hinges
- Tailgate Reinforcement Kit Parts
- Hardware
- Installation Instructions
FREE SHIPPING!
-
Details
Vehicle wear-and-tear is bound to happen over time, especially if you like to play hard. MORryde manufactures the replacement accessories that matter most, like our Jeep Wrangler TJ Tailgate Hinges. When factory hinges begin to wear out, some Jeep enthusiasts might notice a loose tailgate, an annoying rattle or a sagging rear door that is hard to close. This heavy-duty hinge kit restores the integrity of the Jeep Wrangler TJ tailgate.
These Heavy Duty MORryde TJ hinges are built for longevity. Part # JP54-025. The only greazeable TJ hinge on the market, these replacement hinges have heavy-duty bronze bushings that can be replaced (quickly and easily) in the unlikely event that the bushings wear out. In fact, the bushings can be purchased at most hardware stores for easy replacement, and unlike the factory hinge, this hinge does not use the breakage-prone factory plastic cover, better protecting the components.
For the ultimate tailgate upgrade (and reinforcement), pair these hinges with MORryde’s Jeep Wrangler Tailgate Reinforcement.
Jeep Wrangler Tailgate Accessory Tip:
MORryde’s tailgate accessory system is modular, meaning you can purchase and install whichever parts your situation demands. For example, when you’re still toting the factory spare, start off with installing just the hinges for a rattle-free tailgate. When you upgrade to a heavier spare that will fit on the stock carrier, then install the reinforcement along with the hinges. If you go to a larger, heavier spare, install the reinforcement kit(JP54-022).
FREE SHIPPING!
-
Details
Big tires mean big adventures for Jeep enthusiasts, but it also means a big burden on your tailgate when you haul the spare. Introducing MORryde’s Jeep Wrangler TJ Tailgate Reinforcement (JP54-056), an American-made Jeep Wrangler TJ accessory that provides added reinforcement to reduce weak points in the factory tailgate-hinge system while retaining Jeep’s iconic look.
Unlike most swing-away spare carriers, this laser-cut and welded tailgate reinforcement kit doesn’t add hundreds of pounds to your vehicle, and unlike competing cast-aluminum carriers, MORryde’s system reinforces the entire spare carrier, not just the right side, to prevent your tailgate from cracking. This accessory is compatible with factory and aftermarket bumpers, along with factory spare tire carriers.
***This TJ Tailgate Reinforcement kit is designed for customers who have already installed the MORryde TJ HD Tailgate Hinges(JP54-025) and want to add the reinforcement later. For the complete reinforcement kit, including the MORryde TJ HD Tailgate Hinges(JP54-025), please order part # JP54-022. YOU MUST HAVE THE MORryde TJ HINGES TO INSTALL REINFORCMENT – JP54-025 Pictured SOLD SEPARATELY***
MORryde Part # JP54-056
In The Box:
- MORryde TJ Tailgate Reinforcement (MORryde HD Tailgate Hinges – JP54-025 sold separately)
- Hardware
- Installation Instructions
FREE SHIPPING!
Customer Support – joel@retrofitoffroad.com
- Home
- Shop
- Wrangler Model
- Jeep MOLLE Bar Sleeves
- Tactical Jeep MOLLE Gear
- JK MOLLE Tailgate Panel
- JK Overhead MOLLE Panel
- Tactical Spare Cover
- JK HD Door Hinges
- JK HD Tailgate Hinges
- Overland Rack
- TJ HD Tailgate Hinges
- Storegate
- Trail Kitchen
- Jerry Can/Rotopax Mounts
- JK Half Door Sliders
- TrailVision Camera System
- Trail Racks
- The Rubican
- Ammo Can Carrier
- Hardtop Slider Windows
- Jeep Pedal Karts
- Multipod LEDs
- Decals
- My Account
- Checkout
- Cart
- Contact Us
- Wishlist
- Gift Cards
Copyright Retrofit Offroad 2015-2019
Chrysler Jeep, Jeep Wrangler, Wrangler Unlimited, Rubicon, JK Wrangler, TJ Wrangler, and YJ Wrangler are registered trademarks of Chrysler Group LLC. Retrofit Offroad has no affiliation with Chrysler Group LLC. Throughout our website these terms are used for identification purposes only.
Policies, Terms and Conditions