Select And Shop By Your Model Jeep
Shop
Jeep Wrangler Jerry Can Holders
-
Details
Jeep Wrangler JK Side Rotopax Mount, Driver Side – JP54-013
- Carry extra fuel, tools, or first aid for long trips
- Driver side and Passenger side options
- Uses mounting points already present in the Jeep. (One optional self-drilling screw may be installed under the hood to add extra strength.)
- High quality rugged military look
- Does not require drilling any holes in your Jeep
- Easy/Quick removal in minutes
- Provision for mounting a CB Antenna
- Rotopax and Rotopax Center Mount Hub sold seperately
100% Made in the USA – MORryde – Above. Beyond. Always.
FAST FREE SHIPPING!
Also check out the MORryde Jeep Wrangler JK Side Rotopax Mount, Passenger Side – JP54-014
Fitment:
Jeep Wrangler JK 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep Wrangler JK Unlimited (4 Door) 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep Wrangler JK Rubicon 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17 -
Details
Features
- Easily Fits on the MORryde Jeep Wrangler Rotopax mounts and other Rotopax mounts
- Each Can Holds Up to 10 Liters (2.5 Gallons)
- Holds Water, Oil, Coolant, or Other Petroleum Non-Fuel Liquid
- Interlocking Mount System
- Durable Construction
- Easy Grip Handles
- Designed for Jeep CJ, Wrangler YJ, TJ, & JK Models
- Each Rubican comes with a mount.
- Add the Plus One Rubican Mount for mounting additional Rubicans
Fitment
Our Rubicans fit on the MORryde Rotopax mounts (designed for Jeep Wrangler TJ and JK years 1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017).
-
Details
MORryde Frame Side Mount Jerry Can Holder w/ Short Tray – JP54-006
- Mounts to frame just in front of passenger or driver door – simple bolt-on installation, no drilling.
- The can holder slides into a frame-mounted receiver; they install or uninstall easily in minutes so extra fuel is easily carried only when needed.
- Mounts on left or right side of Jeep (or mount one on each side if two extra fuel cans are needed!)
- Available in tall (JP54-007) or short style (JP54-006) trays
- High quality “military” look
- Works with either traditional Jerry cans or NATO-style cans
- Allows customers an extra source of fuel for long trips
- 100% Made In The USA!
FAST FREE SHIPPING!
-
Details
MORryde Frame Side Mount Jerry Can Holder w/ Tall Tray JP54-007
- Mounts to frame just in front of passenger or driver door – simple bolt-on installation, no drilling.
- The can holder slides into a frame-mounted receiver; they install or uninstall easily in minutes so extra fuel is easily carried only when needed.
- Mounts on left or right side of Jeep (or mount one on each side if two extra fuel cans are needed!)
- Available in tall (JP54-007) or short style (JP54-006) trays
- High quality “military” look
- Works with either traditional Jerry cans or NATO-style cans
- Allows customers an extra source of fuel for long trips
- 100% Made In The USA!
FAST FREE SHIPPING!
-
Details
MORryde Jeep Wrangler JK Side Mount Jerry Can, Passenger Side
- Carry extra fuel for long trips or tools in your ammo can
- Driver side and Passenger side options
- Does not require drilling any holes in your Jeep
- Provision for mounting a CB Antenna
- Equipped for a Rotopax mount option or carry 2 Rotopax on tray
- Works with either traditional Jerry cans or NATO-style cans
100% Made in the USA – MORryde Jeep – Above. Beyond. Always.
FAST FREE SHIPPING!
Also check out our JK Driver Side Jerry Can Mount!
-
Details
MORryde Jeep Wrangler JK Side Mount Jerry Can, Driver Side
- Carry extra fuel for long trips
- Driver side and Passenger side options
- Does not require drilling any holes in your Jeep
- Provision for mounting a CB Antenna
- Equipped for a Rotopax mount option or carry 2 Rotopax on tray
- Works with either traditional Jerry cans or NATO-style cans.
100% Made in the USA – MORryde Jeep – Above. Beyond. Always.
FAST FREE SHIPPING!
Also check out our Jeep JK Passenger Side Mount Jerry Can!
-
Details
Spare Tire Jerry Can Holder w/ Tall Tray
- Mounts to spare tire carrier
- Durable construction
- Tall tray design
- Removal and installation in moments
- Easily stow and access gas can
- Works with traditional Jerry Can or NATO style cans
- Includes ratchet strap and rubber tray mat
- For all 1987-2017 Jeep Wrangler models (YJ, TJ, JK, JKU)
FREE SHIPPING!
** Jerry Can Sold Separately**
Also check out our MORryde Spare Tire Jerry Can Holder w/ Short Tray
*Currently out of stock. In production – Availability expected by mid February*
-
Details
Looking for a place to carry extra fuel for those expedition trips or hitting the trails? Check out our Rotopax Tailgate Hinge Mount built for Jeep Wrangler JK. The Rotopax Tailgate Hinge Carrier is designed to work with our JK Heavy Duty Tailgate Replacement Hinges. The great thing about our Rotopax Carrier Mount is that it requires no holes or drilling on your Jeep JK or JKU.
*The Rotopax Carrier Mount is designed to work with up to a 37″ spare tire. Note: Anything larger than a 33″ spare may contact that taillight when the tailgate is fully open. Check back with us soon for tailgate hinge stops – available soon for the larger than 33″ spare tires.
*The Rotopax carrier can only be mounted to our JK Heavy Duty Tailgate Hinges. (Sold Separately)
*Rotopax Pictured Sold Separately
Fitment:
Jeep JK 07, 08, 09, 10, 11, 12, 13, 14, 15, 16
Jeep JK Unlimited (4 Door) 07, 08, 09, 10, 11, 12, 13, 14, 15, 16
Jeep JK Rubicon 07, 08, 09, 10, 11, 12, 13, 14, 15, 16 -
Details
MORryde Jeep Wrangler JK Side Rotopax Mount, Passenger Side JP54-014
- Carry extra fuel, tools, or first aid for long trips
- Driver side and Passenger side options
- Uses mounting points already present in the Jeep. (One optional self-drilling screw may be installed under the hood to add extra strength.)
- High quality rugged military look
- Does not require drilling any holes in your Jeep
- Easy/Quick removal in minutes
- Provision for mounting a CB Antenna
- Rotopax and Rotopax Center Mount Hub sold seperately
100% Made in the USA – MORryde – Above. Beyond. Always.
FAST FREE SHIPPING!
Also check out the MORryde Jeep Wrangler JK Side Rotopax Mount, Driver Side – JP54-013
Fitment:
Jeep Wrangler JK 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep Wrangler JK Unlimited (4 Door) 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep Wrangler JK Rubicon 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17 -
Details
Spare Tire Jerry Can Holder w/ Short Tray
- Mounts to spare tire carrier
- Durable construction
- Short tray design
- Removal and installation in moments
- Easily stow and access gas can
- Works with traditional Jerry Can or NATO style cans
- Includes ratchet strap and rubber tray mat
- For all 1987-2017 Jeep Wrangler models (YJ, TJ, JK, JKU)
FREE SHIPPING!
** Jerry Can Sold Separately**
Also check out our MORryde Spare Tire Jerry Can Holder w/ Tall Tray
-
Details
Set yourself apart and go the distance with the MORryde Rotopax Hinge Mount. While others turn the wheel and call it a day, you are able to stay, play, and explore further! Our heavy-duty Jeep accessories are durable and stand the test of time. Our Rotopax Hinge Mount (JP54-023) easily attaches to the Heavy-Duty TJ Tailgate Hinge Upgrade (sold seperately) with just a few pieces of hardware. No drilling or additional holes necessary!
The beautiful thing about our Jeep product line is that they were designed specifically to be used with our other Jeep accessories. The Rotopax Hinge Mount has provision for mounting the CB Antenna Mount so you can stay connected on your long adventures. Be sure to pair your Rotopax Hinge Mount with the MORryde Heavy-Duty Tailgate Hinge.
Jeep Wrangler Tailgate Accessory Tip:
MORryde’s tailgate accessory system is modular, meaning you can purchase and install whichever parts your situation demands. For example, when you’re still toting the factory spare, start off with installing just the hinges for a rattle-free tailgate. When you upgrade to a heavier spare that will fit on the stock carrier, then install the reinforcement along with the hinges. If you go to a larger, heavier spare, install both the reinforcement and the spare tire carrier for optimal reinforcement, both sold separately.
*The Rotopax Hinge Mount must be attached to the MORryde Heavy Duty Tailgate Hinges (sold separately)
Jeep Wrangler JK Half Door Sliding Glass Windows
-
Details
Jeep JK (2 Door) Soft Retrofit Half Door Upper Slider Kit
Tired of those ripped, scratched, hazy plastic windows on your Jeep Wrangler JK or JKU half door uppers? We have the perfect solution to those inconvenient plastic half door windows! The Jeep JK Soft Retrofit Half Door Glass Slider kit is designed to work on Jeep Wrangler JK (2 door) and JKU (4 door) models from 2007 to 2017. They install in your Jeep JK Upper Half Doors. The soft retrofit half door slider kit work on Jeep JK Factory half door uppers(the single window upper – They do not fit the double window front upper), Bestop Element half door uppers, and Rugged Ridge half door uppers.
This Jeep JK Soft Retrofit Slider kit include the front driver and passenger side Sliding Glass Windows and all the necessary hardware, brackets, and instructions for installation. For more installation information please see our installation tab and you can download the installation guide.
Made In the USA!
Fitment: Jeep Wrangler JK and JKU – Years – 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
***JK Upper Half Doors pictured sold separately***
All Sliders and mounting brackets in kit come in black finish.
-
Details
Soft Retrofit Half Door Slider Kit – Jeep JKU (4 Door)
Tired of those ripped, scratched, hazy plastic windows on your Jeep Wrangler JK or JKU half doors? We have the perfect solution to those inconvenient plastic half door windows! The Soft Retrofit Slider kit is designed to work on Jeep Wrangler JK (2 door) and JKU (4 door) models from 2007 to 2017. They install in your Soft Upper Half Doors. The soft retrofit half door slider kit work on Factory half door uppers, Bestop Element half door uppers, and Rugged Ridge half door uppers.
This Jeep JKU (4 Door) Soft Retrofit Slider kit include the Front and Rear driver and Front and Rear passenger side Sliding Glass Windows and all the necessary hardware, brackets, and instructions for installation. For more installation information please see our installation tab and you can download the installation guide.
Made In the USA
Fitment: Jeep Wrangler JK and JKU – Years – 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
***Upper half doors pictured sold separately***
All Sliders and mounting brackets in kit come in black finish
-
Details
Soft Retrofit Half Door Slider Kit – Jeep JKU (4 Door) with Tinted Rear Windows
Tired of those ripped, scratched, loud, hazy plastic windows on your Jeep Wrangler JK or JKU half doors? We have the perfect solution to those inconvenient plastic half door windows! The Soft Retrofit Slider kit is designed to work on Jeep Wrangler JK (2 door) and JKU (4 door) models from 2007 to 2016. They install in your Soft Upper Half Doors. The soft retrofit half door slider kit work on Factory half door uppers, Bestop Element half door uppers, and Rugged Ridge half door uppers.
This Jeep JKU Soft Retrofit Slider kit include the front and rear driver and passenger side Sliding Glass Windows (4 windows total) and all the necessary hardware, brackets, and instructions for installation. The front pair of sliders are clear glass and rear slider glass is tinted 31%. For more installation information please see our installation tab and you can download the installation guide.
Made In the USA
Fitment: Jeep Wrangler JK and JKU – Years – 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
***Uppers pictured sold separately. Customer is responsible for knowing their states tint laws before purchasing.***
All Sliders and mounting brackets in kit come with black finish
Tactical Spare Tire Covers (multiple Colors)
-
Details
32″ INCH MOLLE TACTICAL SPARE TIRE COVER FOR JEEP WRANGLER
Storage is always at a premium in a Jeep Wrangler, especially one that’s used offroad, for camping, or overlanding. The 32″ inch Tactical Spare Tire Cover provides additional storage for the Jeep – it has several places to attach military-style MOLLE pouches, and it also has an interior storage compartment.
MOLLE (pronounced molly, as in the female name) is an acronym for Modular Lightweight Load- carrying Equipment. It is used to define the current generation of load-bearing equipment and backpacks utilized by a number of NATO armed forces, especially the British Army and the United States Army. The system’s modularity is derived from the use of PALS webbing as rows of heavy-duty nylon stitched onto the vest to allow for the attachment of various MOLLE-compatible pouches and accessories. This method of attachment has become a de facto standard for modular tactical gear.
The 32″ Inch Tactical Spare Tire Cover is made using Mil Spec 1000D Cordura fabric. It is designed with 3 separate areas of MOLLE grid – Two smaller MOLLE grids (One on each side of the Tactical Spare Tire Cover) and one larger MOLLE grid centered on the front of the cover. The 32″ Tactical Spare Cover has a large zippered storage space inside the Tactical Spare Tire Cover. You can easily store a tow strap and other gear in the zippered storage pouch area. The MOLLE grid is convenient to carry all of your modular tactical gear and modular pouches. Our Tactical Spare Tire Covers have 3 velcro areas (above each MOLLE grid) so you can personalize your Tactical Spare Tire Cover with velcro morale patches.
**Patches and Pouches pictured sold separately – Check out our Tactical Jeep MOLLE Gear**
-
Details
35″ INCH MOLLE TACTICAL SPARE TIRE COVER FOR JEEP WRANGLER
Storage is always at a premium in a Jeep Wrangler, especially one that’s used offroad, for camping, or overlanding. The 35″ inch Tactical Spare Tire Cover provides additional storage for the Jeep – it has several places to attach military-style MOLLE pouches, and it also has an interior storage compartment.
MOLLE (pronounced molly, as in the female name) is an acronym for Modular Lightweight Load- carrying Equipment. It is used to define the current generation of load-bearing equipment and backpacks utilized by a number of NATO armed forces, especially the British Army and the United States Army. The system’s modularity is derived from the use of PALS webbing as rows of heavy-duty nylon stitched onto the vest to allow for the attachment of various MOLLE-compatible pouches and accessories. This method of attachment has become a de facto standard for modular tactical gear.
The 35 Inch Tactical Spare Tire Cover is made using Mil Spec 1000D Cordura fabric. It is designed with 3 separate areas of MOLLE grid – Two smaller MOLLE grids (One on each side of the Tactical Spare Tire Cover) and one larger MOLLE grid centered on the front of the cover. The 35″ Tactical Spare Cover has a large zippered storage space inside the Tactical Spare Tire Cover. You can easily store a tow strap and other gear in the zippered storage pouch area. The MOLLE grid is convenient to carry all of your modular tactical gear and modular pouches. Our Tactical Spare Tire Covers have 3 velcro areas (above each MOLLE grid) so you can personalize your Tactical Spare Tire Cover with velcro morale patches.
**Patches and Pouches pictured sold separately – Check out our Tactical Jeep MOLLE Gear**
-
Details
37″ INCH MOLLE TACTICAL SPARE TIRE COVER FOR JEEP WRANGLER
Storage is always at a premium in a Jeep Wrangler, especially one that’s used offroad, for camping, or overlanding. The 37″ inch Tactical Spare Tire Cover provides additional storage for the Jeep – it has several places to attach military-style MOLLE pouches, and it also has an interior storage compartment.
MOLLE (pronounced molly, as in the female name) is an acronym for Modular Lightweight Load- carrying Equipment. It is used to define the current generation of load-bearing equipment and backpacks utilized by a number of NATO armed forces, especially the British Army and the United States Army. The system’s modularity is derived from the use of PALS webbing as rows of heavy-duty nylon stitched onto the vest to allow for the attachment of various MOLLE-compatible pouches and accessories. This method of attachment has become a de facto standard for modular tactical gear.
The 37 Inch Tactical Spare Tire Cover is made using Mil Spec 1000D Cordura fabric. It is designed with 3 separate areas of MOLLE grid – Two smaller MOLLE grids (One on each side of the Tactical Spare Tire Cover) and one larger MOLLE grid centered on the front of the cover. The 37″ Tactical Spare Cover has a large zippered storage space inside the Tactical Spare Tire Cover. You can easily store a tow strap and other gear in the zippered storage pouch area. The MOLLE grid is convenient to carry all of your modular tactical gear and modular pouches. Our Tactical Spare Tire Covers have 3 velcro areas (above each MOLLE grid) so you can personalize your Tactical Spare Tire Cover with velcro morale patches.
**Patches and Pouches pictured sold separately – Check out our Tactical Jeep MOLLE Gear**
Jeep JK Wrangler Tailgate Reinforcement
-
Details
Pair of MORryde Jeep JK Heavy duty tailgate hinges. – Part # JP54-003
- The MORryde Tailgate Hinges eliminate the breakage-prone plastic factory hinge covers
- The MORryde Tailgate Hinges are the only hinge on the market that’s greaseable for long life and smooth operation
- Heavy-duty bronze bushings can be quickly and easily replaced in the unlikely event that bushing wear occurs over time
Over time, all factory JK tailgate hinges will loosen and sag, resulting in a rattling tailgate and making the tailgate harder to close. The photo above shows a factory JK tailgate hinge after only a few years use – notice the rust around the hinge pin – this hinge is already loose and rattles. The reason is the factory hinge pin is steel, and turns in a very thin bearing surface, which is also steel. They will all rust and wear at the hinge pin.Our MORryde Jeep JK tailgate hinges have longer bronze bushings, a stainless steel hinge pin and a grease fitting, so they’ll never rust, sag or rattle.
FREE SHIPPING!
In The Box:
- 2 MORryde HD JK Tailgate Hinges
- Necessary Hardware for Installation
- Detailed Installation Instructions
-
Details
Our MORryde Jeep JK Hi-Lift Jack Carrier is the perfect way to carry your Hi-lift Jack on your Jeep Wrangler JK or JKU. This hi-lift jack carrier mounts to our MORryde JK Heavy Duty Tailgate Hinges. Installation is simple and easily bolts to our JK Heavy Duty Tailgate Replacement Hinges.
FAST FREE SHIPPING!
*The Hi-lift Jack Carrier is designed to work with up to a 35″ spare tire.
*Hi-lift jack carrier can only be mounted to our JK Heavy Duty Tailgate Hinges. (Sold Separately)
-
Details
Looking for a place to carry extra fuel for those expedition trips or hitting the trails? Check out our Rotopax Tailgate Hinge Mount built for Jeep Wrangler JK. The Rotopax Tailgate Hinge Carrier is designed to work with our JK Heavy Duty Tailgate Replacement Hinges. The great thing about our Rotopax Carrier Mount is that it requires no holes or drilling on your Jeep JK or JKU.
*The Rotopax Carrier Mount is designed to work with up to a 37″ spare tire. Note: Anything larger than a 33″ spare may contact that taillight when the tailgate is fully open. Check back with us soon for tailgate hinge stops – available soon for the larger than 33″ spare tires.
*The Rotopax carrier can only be mounted to our JK Heavy Duty Tailgate Hinges. (Sold Separately)
*Rotopax Pictured Sold Separately
Fitment:
Jeep JK 07, 08, 09, 10, 11, 12, 13, 14, 15, 16
Jeep JK Unlimited (4 Door) 07, 08, 09, 10, 11, 12, 13, 14, 15, 16
Jeep JK Rubicon 07, 08, 09, 10, 11, 12, 13, 14, 15, 16 -
Details
MORryde Jeep Wrangler Excursion Rack – JP56-001 Features –
- Fits over the top of the spare tire and installs/uninstalls in minutes
- Rack folds flat for easy storage when not in use; also can fold flat when installed if nothing is being carried at the time
- Provides extra carrying space
- Serves as an on-site foldable trail table
- High quality design
- Adjustable design
- Black powder coat finish
- Fits all model Jeep Wranglers – YJ, TJ, JK, and JKU with a rear mounted spare tire. Years 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
FREE SHIPPING!
-
Details
HD Spare Tire Carrier
• Strong, but lightweight
• Adjustable Heavy Duty Spare Tire Carrier – Two mounting positions – lower position will support most spares up to 37” and higher position will support most spares up to 40”
• Designed to be used with the HD Tailgate Reinforcement (JP54-016) and Heavy Duty Tailgate Hinges (JP54-003), but can mount directly to the factory tailgate
• Comes with an adjustable third brake light stalk which accepts the factory brake light, adjustable to be visible over 40” tires100% Made in the USA!
***Heavy Duty Tailgate hinges (JP54-003) and reinforcement (JP54-016) pictured sold separately***
-
Details
HD Jeep Wrangler JK Tailgate Reinforcement
Tailgate Reinforcement pictured with Heavy Duty Tailgate Hinges (JP54-003) and HD Spare Carrier JP54-017 – sold separately
• Eliminates weak points in the factory tailgate and hinge system
• Retains the factory look of the Jeep
• Compatible with the factory spare carrier (or upgrade to the Heavy-Duty Spare Carrier for even more strength)
• Doesn’t add 100lbs or more like most swingaway spare carriers
• Compatible with the factory bumper or aftermarket bumpers
**The HD JK Wrangler Tailgate Reinforcement is designed to work with our Heavy Duty Tailgate Hinges JP54-003 (Heavy Duty Tailgate Hinges and HD Spare Carrier sold separately). The JK Tailgate reinforcement is not designed to work with factory hinges.**
100% Made In The USA!
-
Details
MORryde Heavy Duty JK Tailgate Hinges Reinforcement Kit – JP54-021
This Complete MORryde Jeep Wrangler Tailgate kit includes: Pair of JK HD Tailgate Hinges, 1 HD JK Spare Carrier, and 1 HD JK Tailgate Reinforcement.
FAST FREE SHIPPING!
100% Made in the USA! MORryde – Above. Beyond. Always.
-
Details
MORryde Jeep Wrangler JK Side Mount Jerry Can, Driver Side
- Carry extra fuel for long trips
- Driver side and Passenger side options
- Does not require drilling any holes in your Jeep
- Provision for mounting a CB Antenna
- Equipped for a Rotopax mount option or carry 2 Rotopax on tray
- Works with either traditional Jerry cans or NATO-style cans.
100% Made in the USA – MORryde Jeep – Above. Beyond. Always.
FAST FREE SHIPPING!
Also check out our Jeep JK Passenger Side Mount Jerry Can!
-
Details
MORryde Jeep Wrangler JK Side Mount Jerry Can, Passenger Side
- Carry extra fuel for long trips or tools in your ammo can
- Driver side and Passenger side options
- Does not require drilling any holes in your Jeep
- Provision for mounting a CB Antenna
- Equipped for a Rotopax mount option or carry 2 Rotopax on tray
- Works with either traditional Jerry cans or NATO-style cans
100% Made in the USA – MORryde Jeep – Above. Beyond. Always.
FAST FREE SHIPPING!
Also check out our JK Driver Side Jerry Can Mount!
-
Details
Spare Tire Jerry Can Holder w/ Tall Tray
- Mounts to spare tire carrier
- Durable construction
- Tall tray design
- Removal and installation in moments
- Easily stow and access gas can
- Works with traditional Jerry Can or NATO style cans
- Includes ratchet strap and rubber tray mat
- For all 1987-2017 Jeep Wrangler models (YJ, TJ, JK, JKU)
FREE SHIPPING!
** Jerry Can Sold Separately**
Also check out our MORryde Spare Tire Jerry Can Holder w/ Short Tray
*Currently out of stock. In production – Availability expected by mid February*
-
Details
Spare Tire Jerry Can Holder w/ Short Tray
- Mounts to spare tire carrier
- Durable construction
- Short tray design
- Removal and installation in moments
- Easily stow and access gas can
- Works with traditional Jerry Can or NATO style cans
- Includes ratchet strap and rubber tray mat
- For all 1987-2017 Jeep Wrangler models (YJ, TJ, JK, JKU)
FREE SHIPPING!
** Jerry Can Sold Separately**
Also check out our MORryde Spare Tire Jerry Can Holder w/ Tall Tray
-
Details
Our Stainless Steel CB Antenna Tailgate Hinge Mount is designed to work with our MORryde Jeep Wrangler JK Heavy Duty Tailgate Hinges (sold separately).
Made In The USA
FREE SHIPPING!
-
Details
Jeep Wrangler JK Side Rotopax Mount, Driver Side – JP54-013
- Carry extra fuel, tools, or first aid for long trips
- Driver side and Passenger side options
- Uses mounting points already present in the Jeep. (One optional self-drilling screw may be installed under the hood to add extra strength.)
- High quality rugged military look
- Does not require drilling any holes in your Jeep
- Easy/Quick removal in minutes
- Provision for mounting a CB Antenna
- Rotopax and Rotopax Center Mount Hub sold seperately
100% Made in the USA – MORryde – Above. Beyond. Always.
FAST FREE SHIPPING!
Also check out the MORryde Jeep Wrangler JK Side Rotopax Mount, Passenger Side – JP54-014
Fitment:
Jeep Wrangler JK 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep Wrangler JK Unlimited (4 Door) 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep Wrangler JK Rubicon 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17 -
Details
MORryde Jeep Wrangler JK Side Rotopax Mount, Passenger Side JP54-014
- Carry extra fuel, tools, or first aid for long trips
- Driver side and Passenger side options
- Uses mounting points already present in the Jeep. (One optional self-drilling screw may be installed under the hood to add extra strength.)
- High quality rugged military look
- Does not require drilling any holes in your Jeep
- Easy/Quick removal in minutes
- Provision for mounting a CB Antenna
- Rotopax and Rotopax Center Mount Hub sold seperately
100% Made in the USA – MORryde – Above. Beyond. Always.
FAST FREE SHIPPING!
Also check out the MORryde Jeep Wrangler JK Side Rotopax Mount, Driver Side – JP54-013
Fitment:
Jeep Wrangler JK 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep Wrangler JK Unlimited (4 Door) 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep Wrangler JK Rubicon 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
Jeep TJ Wrangler Tailgate reinforcement
-
Details
Vehicle wear-and-tear is bound to happen over time, especially if you like to play hard. MORryde manufactures the replacement accessories that matter most, like our Jeep Wrangler TJ Tailgate Hinges. When factory hinges begin to wear out, some Jeep enthusiasts might notice a loose tailgate, an annoying rattle or a sagging rear door that is hard to close. This heavy-duty hinge kit restores the integrity of the Jeep Wrangler TJ tailgate.
These Heavy Duty MORryde TJ hinges are built for longevity. Part # JP54-025. The only greazeable TJ hinge on the market, these replacement hinges have heavy-duty bronze bushings that can be replaced (quickly and easily) in the unlikely event that the bushings wear out. In fact, the bushings can be purchased at most hardware stores for easy replacement, and unlike the factory hinge, this hinge does not use the breakage-prone factory plastic cover, better protecting the components.
For the ultimate tailgate upgrade (and reinforcement), pair these hinges with MORryde’s Jeep Wrangler Tailgate Reinforcement.
Jeep Wrangler Tailgate Accessory Tip:
MORryde’s tailgate accessory system is modular, meaning you can purchase and install whichever parts your situation demands. For example, when you’re still toting the factory spare, start off with installing just the hinges for a rattle-free tailgate. When you upgrade to a heavier spare that will fit on the stock carrier, then install the reinforcement along with the hinges. If you go to a larger, heavier spare, install the reinforcement kit(JP54-022).
FREE SHIPPING!
-
Details
Big tires mean big adventures for Jeep enthusiasts, but it also means a big burden on your tailgate when you haul the spare. Introducing MORryde’s Jeep Wrangler TJ Tailgate Complete Reinforcement Kit (JP54-022), an American-made Jeep Wrangler TJ accessory that provides added reinforcement to reduce weak points in the factory tailgate-hinge system while retaining Jeep’s iconic look.
Unlike most swing-away spare carriers, this laser-cut and welded tailgate reinforcement kit doesn’t add hundreds of pounds to your vehicle, and unlike competing cast-aluminum carriers, MORryde’s system reinforces the entire spare carrier, not just the right side, to prevent your tailgate from cracking. This accessory is compatible with factory and aftermarket bumpers, along with factory spare tire carriers.
MORryde Part # JP54-022
In The Box:
- 2 HD TJ Tailgate Hinges
- Tailgate Reinforcement Kit Parts
- Hardware
- Installation Instructions
FREE SHIPPING!
-
Details
With your adventurous attitude and determined spirit, you tend to get yourself stuck in between a rock and a hard place. . . literally. With the help of your nifty Offroad Jack and the support of the MORryde Offroad Jack Carrier, you will be able to play more and worry less. Our heavy-duty Jeep accessories are durable and stand the test of time. Our Offroad Jack Carrier easily mounts to the Heavy-Duty TJ Tailgate Hinge Upgrade (sold seperately) with just a few pieces of hardware.
The beautiful thing about the MORryde Jeep product line is that they were designed specifically to be used with our other Jeep products. The Offroad Jack Carrier has provision for mounting the CB Antenna Mount so you can stay connected on your adventures. For the ultimate tailgate upgrade (and reinforcement), pair your Offroad Jack Carrier with the MORryde Heavy-Duty Tailgate Hinge.
Jeep Wrangler Tailgate Accessory Tip:
MORryde’s tailgate accessory system is modular, meaning you can purchase and install whichever parts your situation demands. For example, when you’re still toting the factory spare, start off with installing just the hinges for a rattle-free tailgate. When you upgrade to a heavier spare that will fit on the stock carrier, then install the reinforcement along with the hinges. If you go to a larger, heavier spare, install both the reinforcement and the spare tire carrier for optimal reinforcement, both sold separately.
*The Offroad Jack Carrier must be mounted to the MORryde Heavy Duty Tailgate Hinges
FREE SHIPPING!
-
Details
Set yourself apart and go the distance with the MORryde Rotopax Hinge Mount. While others turn the wheel and call it a day, you are able to stay, play, and explore further! Our heavy-duty Jeep accessories are durable and stand the test of time. Our Rotopax Hinge Mount (JP54-023) easily attaches to the Heavy-Duty TJ Tailgate Hinge Upgrade (sold seperately) with just a few pieces of hardware. No drilling or additional holes necessary!
The beautiful thing about our Jeep product line is that they were designed specifically to be used with our other Jeep accessories. The Rotopax Hinge Mount has provision for mounting the CB Antenna Mount so you can stay connected on your long adventures. Be sure to pair your Rotopax Hinge Mount with the MORryde Heavy-Duty Tailgate Hinge.
Jeep Wrangler Tailgate Accessory Tip:
MORryde’s tailgate accessory system is modular, meaning you can purchase and install whichever parts your situation demands. For example, when you’re still toting the factory spare, start off with installing just the hinges for a rattle-free tailgate. When you upgrade to a heavier spare that will fit on the stock carrier, then install the reinforcement along with the hinges. If you go to a larger, heavier spare, install both the reinforcement and the spare tire carrier for optimal reinforcement, both sold separately.
*The Rotopax Hinge Mount must be attached to the MORryde Heavy Duty Tailgate Hinges (sold separately)
MORRYDE AMMO CAN CARRIER
-
Details
THE MORRYDE UNIVERSAL AMMO CAN TRAY:
Virtually anywhere a jerry can or Rotopax(r) container can be installed, the Universal Ammo Can Tray can be mounted – it’s a great way to increase the cargo/storage capacity of your Wrangler. With its universal-mount design, the Universal Ammo Can Tray can be installed to any surface in the Jeep , including the floor or a roof rack, and many aftermarket accessories such as swing-away spare tire carriers. Having mounting provisions for either jerry can trays or Rotopax(r) mounts – the Universal Ammo Can Tray has matching bolt patterns for the Blitz/military jerry can tray and the Rotopax(r) mounting stud, so it can be mounted easily almost anywhere that has provisions for those mounting patterns.Universal Ammo Can Tray Specifics:
- Standard .50 cal.”
- “Fat .50 Cal.” “Tall .50 Cal.”
- Two .30 Cal.” cans will fit at the same time
- Any other cargo of similar size such as a battery or small cooler
IN THE BOX:
- JP54-031 comes with:
- Ammo can tray
- Hardware
- Instructions
- Straps pictured with ammo can sold separately
- Ammo Can Sold Separately
-
Details
MORryde Ammo Can Carrier
Cargo space is always at a premium in a Jeep JK Wrangler Unlimited (4 door), and some of the cargo space that does exist is hard to use – for example, the space above the inner fenders in the cargo area of an Unlimited is curved, sloped and irregularly shaped, so it’s often wasted space. The MORryde Ammo Can Carrier is designed to use that space very effectively. Bolted in place using the same holes that the hardtop is secured with (no drilling), the Ammo Can Carrier supports all common ammo can sizes and has a Molle grid for attaching common Molle-standard pouches and other gear. Being very rugged and waterproof, common uses for ammo cans on Jeeps include carrying recovery supplies (chains, recovery straps), tools or other gear needed on the trail.
MORryde Ammo Can Carrier Features:
– Supports all common ammo can sizes:
– 50 cal.
– “Fat 50”
– Two 30 cal. cans will fit at the same time
– A “Tall 50” can be used for even more space
– Or any other cargo of similar size (spare battery, etc.)– Grid for attachment of Molle-standard pouches and other gear
– Easy two-bolt installation using holes already in the Jeep
– Can be installed on either side of the Jeep (install one on each side for
more storage)– Rugged 16-gauge steel construction and durable powdercoat finish
– Fits 2007-2018 Jeep JK Unlimited (4 Door)
IN THE BOX:
- JP54-030 comes with:
- Ammo can carrier with MOLLE gird
- Ammo can tray
- Strap
- Hardware
- Instructions
- JP54-030 comes with:
MORryde Storegate Tailgate Storage
-
Details
MORryde Jeep Wrangler JK Storegate Tailgate Storage / Trail Table- JP54-020, Netted Version – JP54-032
Whether you are a weekend warrior or a mom of four, your Jeep brings you a sense of adventure. The iconic Jeep Wrangler JK can be seen driving down the interstate or on the rugged trails of Moab, but regardless of where your Jeep Wrangler leads you, one thing remains relevant – there just isn’t enough space.
Like all vehicles – big or small – space seems to be an issue. Every square inch is packed with your air fresheners, your kid’s toys, your spare change, your car jack, and of course your prized collection of fast-food receipts. Fortunately, MORryde came up with their very own trunk storage solution to give you added space for whatever the need.
The MORryde Jeep Wrangler JK StoreGate is mounted to the inside of your tailgate and installs in just minutes. Secured with several screws and finished with a water resistant bulb-seal, the MORryde StoreGate allows you to get into “sticky” situations all while securing your possessions. This heavy-duty trunk storage solution boasts a mighty 35 lb weight capacity.
We offer two styles to pick from: hard cover lockable door version and a netted version.
Our aluminum hard cover door boasts a mighty 35 lb weight capacity. This heavy-duty trunk storage solution has a locking door which allows you to store more precious items inside and allows you to have peace-of-mind whether you are out exploring the path less traveled in a national park, or an aisle less traveled in your local grocery store.
Our netted version, much like the hard cover version, offers added space, but with even easier access to the contents inside. Perfect for storing an extra hitch, quarts of oil, or your tool set, the netted StoreGate maximizes your storage all while keeping your Jeep organized.
Have a TJ Jeep instead of a JK? No worries, we have a couple options for you too.
FAST FREE SHIPPING!
100% Made In The USA!
-
Details
MORryde Jeep Wrangler TJ Storegate Tailgate Storage – Trail Table – JP54-028, Netted Version – JP54-033
Whether you are a weekend warrior or a mom of four, your Jeep brings you a sense of adventure. The iconic Jeep Wrangler TJ can be seen driving down the interstate or on the rugged trails of Moab, but regardless of where your Jeep Wrangler leads you, one thing remains relevant – there just isn’t enough space.
Like all vehicles – big or small – space seems to be an issue. Every square inch is packed with your air fresheners, your kid’s toys, your spare change, your car jack, and of course your prized collection of fast-food receipts. Fortunately, MORryde came up with their very own trunk storage solution to give you added space for whatever the need.
The MORryde Jeep Wrangler TJ StoreGate is mounted to the inside of your tailgate and installs in just minutes. Secured with several screws and finished with a water resistant bulb-seal, the MORryde StoreGate allows you to get into “sticky” situations all while securing your possessions. This heavy-duty trunk storage solution boasts a mighty 30 lb weight capacity.
We offer a two styles to pick from: hard cover door version and a netted version.
Part # JP54-028 – Our aluminum hard cover door boasts a mighty 35 lb weight capacity. This heavy-duty trunk storage solution has a locking door which allows you to store more precious items inside and allows you to have peace-of-mind whether you are out exploring the path less traveled in a national park, or an isle less traveled in your local grocery store.
Part # JP54-033 – Our netted version, much like the hard cover version, offers added space, but with even easier access to the contents inside. Perfect for storing an extra hitch, quarts of oil, or your tool-set, the netted StoreGate maximizes your storage all while keeping your Jeep organized.
Have a JK Jeep instead of a TJ? No worries, we have a couple options for you too.
FAST FREE SHIPPING!
100% Made In The USA!
Trailvision offroad trail camera system for jeep wrangler
-
Details
This System is the foundation for all TrailVision installations. Start with this system, and either add your own cameras and accessories, or buy guaranteed-compatible cameras and other accessories from us to build your ideal system. The Base System/DIY System includes a very detailed 40+ page installation and operations manual which provides step-by-step instructions for installing and wiring the system in a Jeep JK or TJ. The 7″ LCD monitor can display up to 4 cameras at one time, and includes DVR capability and advanced features such as triggers and audio inputs/recording. Also includes a multifunction remote control, and wiring and power adapters for 4 cameras.
*** The Base system does not include any cameras. The Base System accepts any cameras with an RCA output for video.***
-
Details
TrailVision Offroad Jeep Camera System A includes everything offered in our Base System/DIY System, but includes our Trail Tested and proven cameras, camera mounts, wiring and 40+ page installation and operations manual.
TRAILVISION SYSTEM A INCLUDES:
- Detailed 40+ page installation and operations manual which provides step-by-step instructions for installing and wiring the system in a Jeep JK or Jeep TJ.
- The TrailVision 7″ monitor can display up to 4 cameras at one time, and includes DVR capability and advanced features such as triggers and audio inputs/recording.
- Multifunction remote control
- Wiring and power adapters for 4 cameras.
- 1 – TrailVision License Plate Camera with 16ft of camera cable.
- 3 – TrailVision Bullet Cameras
- 3 – TrailVision camera mounts and magnetic mounts for Bullet Cameras.
- ATM fuse tap and fuse
- T-taps for connecting TrailVision triggers to Jeep circuits
-
Details
TrailVision System B includes everything offered in our Base System/DIY System, but includes our Trail Tested and proven cameras, camera mounts, wiring and 40+ page installation and operations manual.
TRAILVISION SYSTEM B INCLUDES:
- Detailed 40+ page installation and operations manual which provides step-by-step instructions for installing and wiring the system in a Jeep JK or TJ.
- The TrailVision 7″ monitor can display up to 4 cameras at one time, and includes DVR capability and advanced features such as triggers and audio inputs/recording.
- Multifunction remote control
- Wiring and power adapters for 4 cameras.
- 4 – TrailVision Bullet Cameras
- 4 – TrailVision camera mounts and magnetic mounts for Bullet Cameras.
- ATM fuse tap and fuse
- T-taps for connecting TrailVision triggers to Jeep circuits
-
Details
TrailVision License Plate Camera Features:
Our Heavy Duty TrailVision License Plate Camera easily mounts to the front or back license plate. This license plate camera has 170 degree viewing (ultra-wide angle) and swivels 90 degrees to give you the perfect view in all situations. The TrailVision License Plate camera comes with 16ft of camera cable. Night Vision with very little ambient light provides a great picture at night. The camera simply screws onto the license plate and an IP68 waterproof rating ensures it will function in all weather conditions. ** The TrailVision License Plate camera may not work on all Jeep model rear license plates. For Jeep JK’s that run the factory rear license plate holder we recommend using a bullet camera instead of this license plate camera.**
-
Details
This TrailVision Monitor/DVR Wiring Harness is included in all the TrailVision systems (Base System, System A, and System B), but is also offered seperately so you can use your system in a second vehicle without having to remove the monitor wiring.
-
Details
Our TrailVision Bullet Cameras have a 170 degree viewing angle. They are small enough to mount anywhere – it’s the same diameter as a dime! Completely weather proof and are the perfect size to mount anywhere on your Jeep. Our TrailVision Bullet cameras include 4 mounting options:
- Screw-mount base
- Hi-power magnets with rubber boots
- Angle bracket to mount to standard 1/4″ camera stud mounts and GoPro mounts
- Flush mount (includes hole saw)
-
Details
All TrailVision Systems come with a screw-mount u-bracket monitor mount, but you may decide that a different mount is best for your situation. The Double Swivel Mount Screw-in base. With double swivel heads, this mount allows for phenomenal flexibility. Its secure base screws into the dash or ceiling and its flexibility allows the monitor to mount in the best position for viewing. This mount also works with the Rugged Ridge dash top for the 2007-2010 Wrangler with device mounting ball.
-
Details
All TrailVision Systems come with a screw-mount u-bracket monitor mount, but you may decide that a different mount is best for your situation. This Windshield Suction Cup Monitor Mount is designed to work with our TrailVision Monitor and allows you to place the monitor anywhere that you would like on the windshield.
INDIVIDUAL MOLLE BAR ROLL BAR SLEEVES
-
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
FREE SHIPPING!
*Molle Pouches pictured sold separately.*
Details
-
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
FREE SHIPPING!
*Pouches pictured sold separately.*
Details
-
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
FREE SHIPPING!
*Pouches Pictured Sold Separately*
Details
-
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
*Molle Pouches pictured are sold separately*
Details
-
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
Style E – 11″ Long by 8″ Wide with vertical PALS Orientation. Style E Molle Bar Sleeves are ideal for the rear roll bars on Jeep Wrangler JK (2 door) and JKU (4 door) models with soft top. Mix and match the different Molle Bar Sleeve styles or get a great deal on a package designed for your model Jeep.
FREE SHIPPING!
*Molle Pouches pictured are sold separately*
Details
-
Always scrambling to find the garage door opener in your Jeep Wrangler? Our Jeep Wrangler Garage Door Remote Holder conveniently attaches around the roll bar for stealthy easy access. Also works great holding other similar size items and devices. Works on CJ, YJ, TJ, and JK model Jeep Wranglers.
* Garage door opener sold separately 😉
FREE SHIPPING!
Details
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
FREE SHIPPING!
*Molle Pouches pictured sold separately.*
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
FREE SHIPPING!
*Pouches pictured sold separately.*
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
FREE SHIPPING!
*Pouches Pictured Sold Separately*
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
*Molle Pouches pictured are sold separately*
Molle Bar sleeves are available in a range of lengths and styles and can be mixed and matched and combined with the many available pouches and other accessories to make a custom-tailored storage system for any Jeep.
Style E – 11″ Long by 8″ Wide with vertical PALS Orientation. Style E Molle Bar Sleeves are ideal for the rear roll bars on Jeep Wrangler JK (2 door) and JKU (4 door) models with soft top. Mix and match the different Molle Bar Sleeve styles or get a great deal on a package designed for your model Jeep.
FREE SHIPPING!
*Molle Pouches pictured are sold separately*
Always scrambling to find the garage door opener in your Jeep Wrangler? Our Jeep Wrangler Garage Door Remote Holder conveniently attaches around the roll bar for stealthy easy access. Also works great holding other similar size items and devices. Works on CJ, YJ, TJ, and JK model Jeep Wranglers.
* Garage door opener sold separately 😉
FREE SHIPPING!
JK and JKU Molle Bar Sleeve Kits
-
Details
This kit is designed for the most complete Molle Bar Roll Bar coverage on a 4 door JKU Jeep Wrangler (2007-2015) model with soft top. Please see description below for kit contents.
*** Pouches pictured sold separately*** Check out all of our Jeep MOLLE Pouches and gear
FREE SHIPPING!
-
Details
4 Door JKU Wrangler Molle Panel Bar Kit – Hard Top
This kit is designed for the most complete Molle Bar coverage on a 4 door JKU Wrangler (2007-2015) model with hard top. See Description below for package contentsFAST FREE SHIPPING!
Check out all of our Jeep MOLLE Pouches and Gear
-
Details
2 Door JK Wrangler Molle Panel Bar Kit – Hard Top
This kit is designed for the most complete coverage on a 2 door JK Wrangler (2007-2015) model with hard top. See Description below for kit contents.Check out all of our Jeep MOLLE Pouches and Gear
FAST FREE SHIPPING!
TJ MOLLE BAR SLEEVE KITS
-
Details
This kit is designed for Molle Bar coverage on a 2003 – 2006 TJ or LJ Wrangler with hard top. This provides Molle Bar Sleeves in all locations. For more coverage please see the 2003 – 2006 TJ Kit 1 – Hard Top.
2 Style B (15″) Black Molle Bar Sleeves for Front Extension Bars
1 Style C (15″) Black Molle Bar Sleeves, PALS On Both Front and Back of Center Main Roll Bar
2 Style B (15″) Black Molle Bar Sleeves for Rear Extension Bars
2 Style D (15″) Black Molle Bar Sleeves for Bottom of Rear BarsTotal number of Molle bars in this kit = 7. 4 Style B, 1 Style C, and 2 Style D
FREE SHIPPING!
-
Details
This kit is designed to provide maximum Molle Bar coverage on a 2003-2006 TJ or LJ Wrangler with hard top. This kit has 11 Molle bar sleeves compared to the 2003-2006 TJ with hard top Kit 2 that has 7 Molle bar sleeves. Please see “In The Box” for items included on this package.
FREE SHIPPING!
*Pouches Pictured sold separately* -
Details
This kit is designed for Molle Bar coverage on a 2003 – 2006 TJ or LJ Wrangler with soft top. This provides Molle Bar Sleeves in all locations. For more coverage please see the 2003 – 2006 TJ Kit 1 – soft top.
-
Details
This kit is designed to provide maximum Molle Bar coverage on a 2003-2006 TJ and LJ Wrangler with soft top. This kit includes 9 Molle Bar Sleeves for maximum Roll Bar coverage.
FREE SHIPPING!
-
Details
This kit is designed to provide the maximum Molle Bar coverage on a 1997-2002 TJ Wrangler with soft top. See kit 2 for a different assortment of Molle bar sleeves.
-
Details
This kit is designed for Molle Bar coverage on a 1997-2002 TJ Wrangler with soft top. This provides Molle Bar Sleeves in all locations. For more coverage please see the 1997-2002 TJ Kit 1 – soft top.
-
Details
This kit is designed for Molle Bar coverage on a 1997-2002 TJ Wrangler with hard top. This provides Molle Bar Sleeves in all locations. For more coverage please see the 1997-2002 TJ Kit 1.
-
Details
This kit is designed to provide maximum Molle Bar coverage at all roll bar locations on a 1997-2002 TJ Wrangler with hard top. Please see Kit 2 for fewer molle bar sleeves.
